Aria Darb Group, as a sales center for all types of blades and shutter motors in Pardis, is a direct source for supplying standard aluminum, galvanized foamed and polycarbonate blades along with side and tubular motors for residential, commercial buildings and industrial sheds in the east of Tehran province. Buyers in different phases of the campus need special structures such as heavy-duty blades and motors with 100% copper winding due to extreme temperature fluctuations, mountain winds and the need to withstand wind pressure. Ordering directly from the campus's central warehouse eliminates the intermediary costs of Mekan and Shadabad iron markets and brings the delivery and specialized installation of the project to less than 24 hours.
Technical challenges of electric shutters in campus climate
Our field experience in installing hundreds of electric shutter openings in different phases of the campus, especially phases 8 and 11, shows that the mountainous climate of this region imposes different technical conditions compared to the center of Tehran. The difference between the day and night temperatures in winters, as well as the windiness of the ground floors and parking ramps, causes light and waste blades to become distorted, produce unpleasant noises, and even derail after a few months.
To face this problem, the following two technical variables should be controlled at the time of purchase:
Choosing the type of blade according to the dimensions and use
In practice, it has been observed that most of the failures are due to the incorrect selection of the blade for large openings. At the Aria Darb sales center in the campus, the following models are recommended after evaluating the wind pressure:
- Extruded aluminum blade (billet 6063 fabric): These blades are not made of recycled aluminum, they do not become brittle due to the cold, and due to the thickness of the standard meat, they are the best option for the parking lot of high-traffic residential complexes.
- Anti-theft and fireproof steel blade: Made of hard galvanized sheet with anti-cut and anti-impact design, which due to its higher weight, is suitable for shops. Banks and openings are very windy in the open passages of the campus.
- Transparent polycarbonate (nano composite) blade: For gold shops and luxury business units with connecting steel pipes that provide security and full view of the showcase at the same time.
Matching shutter motor power with actual weight and traffic
Burning of the electric shutter motor rotor and gearbox is the most commonly reported problem on campus. The main reason for this issue is the use of aluminum winding motors instead of copper and the wrong estimation of the weight of the shutter curtain.
- Tubular motor (built-in): suitable for small openings with limited traffic (such as windows and single-unit parking lots). These motors are placed inside the shaft tube and reduce the space occupation to zero.
- Side motor (chain/industrial): These motors are designed for high-traffic parking lots of residential complexes and entrances to sheds or warehouses in Siah Seng and Khorramdasht workshop areas. Copper models equipped with a UPS system provide the possibility of opening and closing the door during a power outage.
Technical comparison of side and tubular motors for campus projects
The wrong choice between motor side and tubular will cause heavy financial damage in the long run. Tubular motors are suitable for openings below 14 square meters and with an approximate weight of up to 120 kg; But if the parking traffic is high, these motors will heat up and their internal thermostat will cut off the circuit.
On the other hand, side motors have a much higher life span due to their placement outside the tube and easy access for service and lubrication. For high-traffic ramps in Phase 11 and crowded towers in Phases 3 and 4, using a 300 or 600 kg chain motor side with a reinforced gearbox is a standard and tested solution that prevents rapid wear of parts.
Why is it more logical to buy electric shutters on campus?
Many of the builders and residents of the campus go to Tehran's traditional markets thinking of lower prices; While buying directly from the local supplier brings tangible benefits:
- Eliminating the heavy cost of renting an intercity van: Transferring 6-meter blades and heavy shafts from Tehran to the campus has a high cost, which negates a large part of the initial discounts.
- Possibility of part replacement and calibration on the same day: If there is an error in the measurement or the parts are broken during assembly, the blade or rail can be replaced from Aria Darb warehouse in a few hours.
- Emergency support without delay: When a technical fault occurs in the late hours of the night, the presence of a technician on campus is the difference between the door being closed or it being opened quickly.
Checking and ordering procedures in Aria Darb collection
Aria Door Collection has designed the ordering system in such a way that the error is zero:
- Dispatch of a technical expert to accurately measure the plumb line and level of the opening: In newly built campus structures, due to construction settlements, millimetric measurement of the dimensions is required to prevent shutter jamming.
- Technical package proposal according to the budget and wind position: Accurate determination of the thickness of the blade, the thickness of the rubber at the end of the blade to insulate the dust and power Motor.
- Production, assembly and final testing of rails and caps in the campus workshop: All cutting is done with an automatic machine to avoid noise caused by uneven edges.
- Installation by the local team and issuance of a valid written warranty: Complete delivery of the system with coding of remotes and visual activation and safety flasher.
Currently, residents, mass builders and business owners in all phases of the campus and surrounding industrial areas can contact Aria Darb experts to check the field of the project, inquire about the price of the aluminum blade and the original motors, and receive a transparent pre-invoice.

